SFAR-1M-2DI2DO

SFAR-1M-2DI2DOAbout the product SFAR 1M 2DI2DO has 2x DI (Digital Inputs) and 2x DO (Digital Outputs). Digital Inputs can work as fast pulse counter up to 1 kHz, support PNP or NPN input types. Digital Outputs are PNP transistor outputs with maximum load 250 mA, 55 V DC. All inputs and outputs are separated from power supply and RS485 block with use of optical isolators. Built in RS485 interface allows to easy connection over Modbus RTU ASCII protocol with a PLC

About the product

SFAR-1M-2DI2DO has 2x DI (Digital Inputs) and 2x DO (Digital Outputs). Digital Inputs can work as fast pulse counter up to 1 kHz, support PNP or NPN input types. Digital Outputs are PNP transistor outputs with maximum load 250 mA, 55 V DC. All inputs and outputs are separated from power supply and RS485 block with use of optical isolators.
Built-in RS485 interface allows to easy connection over Modbus RTU/ASCII protocol with a PLC makes the modules an external I/O. The use of 32-bit ARM core processor provides fast processing and communication with the baud rate from 2400 to 115200 bps. The module is equipped with a set of LEDs used to indicate the status of inputs, outputs, power supply and RS485 communication. This feature is useful for diagnostic purposes and helping to find errors.
Built-in mini USB allows for initial configuration of the unit without power supply.

Key Features
• 2x opto-isolated Digital Input
• 2x opto-isolated Digital Output
• Every DI works as 32-bit impulse counter or time counter
• Support for encoder
• 55 V @ 250 mA per output
• Built-in LEDs for device status indication
• Modbus RTU/ASCII communication
• Baud rate: 2400 bps to 115200 bps
• Up to 128 modules on the bus
• Built-in mini USB type B port for configuration
• Space-saving housing, DIN rail mount

Specification
Digital Inputs (DI)
• Input type: PNP or NPN
• Fast pulse counter up to 1 kHz
• Time counting in ms for active input
• DI1-DI1- 1x encoder support
Digital Outputs (DO)
• Transistor output (PNP) max. 250 mA, 55 V DC Platform
• ARM Cortex-M3 Communication
• Interface RS485 half-duplex
• Up to 128 devices on the bus
• Protocol: Modbus RTU/ASCII
• Baud rate: 2400 to 115200 bps
• Interface mini USB type B

Power supply
• 12-24 V DC ± 20%

Housing
• Dimension WxHxD: 17x90x56 mm
• Construction: UL approved,self-extinguishing plastic (PC/ABS)
• DIN rail mounting DIN (DIN EN 50022 norm)
• Cooling: internal air circulation

Environment
• Operating temperature: -10°C to 50°C
• Storage temperature: -40°C to 85°C
• Relative humidity: 5% to 95%, no condensation
• Ingress Protection Rating: IP40 – for indoor installation

Do you have a question about this product?