Rode VideoMic Pro with Rycote Lyre Shockmount & Windbuster Windshield Kit

The VideoMic Pro with Rycote Lyre Shockmount & Windbuster Windshield Kit from B&H features a Rode VideoMic Pro supercardioid condenser shotgun microphone with integrated Rycote Lyre shockmount and an Auray WSW-VMP windbuster. It can be used to capture audio in outdoor environments for camcorders, DSLRs, portable recorders, and more.

The VideoMic Pro has been updated from earlier models with a larger condenser capsule (1/2") and provides broadcast-quality audio. The 1/8" stereo mini-jack connector outputs a mono signal to both left and right channels and delivers low self-noise of just 14 dB. Easily accessible on the rear face of the microphone are the power, the filter, the level controls, and a selectable high-pass filter at 80 Hz.

The Auray WSW-VMP provides dual-layered wind protection and reduces wind noise up to 30 dB. It also protects the microphone from moisture and dirt. It has a simulated-fur outside and an acoustic-cloth lining inside. Furthermore, the kit provides and effective way to minimize wind noise and plosive sounds. It is most effective in a light to moderate breeze.

• Rode VideoMic Pro with Rycote Lyre Shockmount

  The VideoMic Pro with Rycote Lyre Shockmount from Rode is a supercardioid condenser shotgun microphone that terminates in a 1/8" stereo mini-jack (dual mono), includes an integrated shockmount, and an integrated foam windscreen. It can be used to capture audio for camcorders, DSLR, and portable recorders as a source of primary and reference audio.

  The VideoMic Pro has been upgraded from earlier models with a 1/2" condenser capsule that provides broadcast-quality audio. Its 1/8" stereo mini-jack connector (outputting the mono signal to both left and right channels) delivers low self-noise of just 14 dB. A supercardioid polar pattern ensures that surrounding audio is minimized, and your recording is focused on the subject in front of the camera.

  In addition, the Rycote Lyre-based shockmount is built from a single piece of hard-wearing thermoplastic. It separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. This suspension will never wear out, sag or snap.

  Easily accessible on the rear face of the microphone are the power, the filter, the level controls and a selectable high-pass filter at 80 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being recorded. Furthermore, the -10 dB (or pad) is suitable when recording loud sound sources such as live music, motorsports, or interviews, where the subject is very close to the camera. There is a +20 dB level boost designed for use with DSLR cameras, so the user can reduce the camera's preamp level, effectively reducing the amount of noise generated by the camera's audio circuitry.

  The Rode VideoMic Pro uses a standard sized shoe-mount for on-camera use and features a 3/8" thread in the base of the mount for easy boom-pole mounting. The VideoMic Pro is battery powered and provides over 70-hours recording from a single 9V battery.

  9V battery powered with over 70 hours use (alkaline)

  Camera shoe mount with 3/8" thread for easy boom-pole mounting

  Compact form factor is only 6.7" length

  10-year warranty with online registration

  UPC: 698813004195
• Auray WSW-VMP-R Windbuster for Rode VideoMic Pro with Rycote Lyre Shockmount

  The Auray WSW Series Custom Windbusters provide dual-layered wind protection, substantially reducing unwanted broadband wind noise and vocal pops with minimal high frequency loss. The WSW-VMP-R Windbuster has been custom-made for the VideoMic Pro with the Rycote Lyre Shockmount and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound. The velvet back cover with locking drawstring offers protection to the microphone, as well as easy access to the controls.

  When used on the VideoMic Pro, the Windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph), and users can generally expect a 30 dB to 40 dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMP-R helps prevent moisture and dirt from damaging your microphone.

  Fits:

  Rode VideoMic Pro with Lyre Shockmount

  UPC: 847628595279