Motul 8100 X-clean EFE 5W-30 Synthetic Oil

Motul 8100 X-clean EFE 5W-30 Synthetic OilMotul 8100 X clean EFE 5W 30 Synthetic Oil High performance 100% Synthetic lubricant specifically designed for powerful and recent cars fitted with large displacement engines, Gasoline and direct injection turbo Diesel. Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. Approved by OEMs such as BMW Group, GM (General Motors) OPEL, MERCEDES and VW for its EFE Extra Fuel Economy property. Specially

Motul 8100 X-clean EFE 5W-30 Synthetic Oil

High performance 100% Synthetic lubricant specifically designed for powerful and recent cars fitted with large displacement engines, Gasoline and direct injection turbo Diesel. 

Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. Approved by OEMs such as BMW Group, GM (General Motors) OPEL, MERCEDES and VW for its EFE - Extra Fuel Economy - property. Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection.

For vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (≤0.8%), Phosphorus (0.07% ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), or an ACEA C2 engine oil i.e. a low friction, low HTHS (≥ 2.9 mPa.s) viscosity and "Mid SAPS" oil with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (≤ 0.09%) and Sulphur (≤ 0.3%). \n

• Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard.
  
• Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).
  
• May be unsuitable for use in some engines.  Always refer to the owner’s manual if in doubt.
  

PERFORMANCES STANDARDS

• ACEA C2 / C3
  
• API SERVICE SN
  

APPROVALS 

• BMW Long Life-04
  
• GM-OPEL dexos2™ (replaces GM-LL-A-025 & B-025) under N° D20247HE011
  
• MB-Approval 229.52
  
• OPEL/VAUXHALL OV0401547
  
• VW 505 00 505 01
  

PERFORMANCES  

• FIAT 9.55535-S1 / S3
  

RECOMENDATIONS  

• Drain interval: according to manufacturers’ recommendations and tuned to your own use.
  
• Do not mix with lubricants not ACEA C3 or ACEA C2 compliant.
  
• Before using, always refer to the owner’s manual or handbook of the vehicle.
  

PROPERTIES

Viscosity grade SAE J 300 5W-30

Density at 20°C (68°F) ASTM D1298 0.851 

Viscosity at 40°C (104°F) ASTM D445 70.1 mm²/s

Viscosity at 100°C (212°F) ASTM D445 12.1 mm²/s

Viscosity HTHS at 150°C (302°F) ASTM D4741 3.5 mPa.s

Viscosity index ASTM D2270 169

Pour point ASTM D97 -42°C / -44°F

Flash point ASTM D92 232°C / 450°F 

Sulfated ash ASTM D874 0.78% weight 

TBN ASTM D2896 7.8 mg KOH/g