PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer Combo

PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer ComboThe Vastex PTF 100 DTF Powder to Film system and D 100 Dryer Combo not only uniformly coats DTF films with adhesive powder but also cures it all in one! Completely eliminate dusting and spillage along with reducing waste while improving DTF printing performance and operator safety. To operate, a filled cartridge is inserted at the top of the unit, and an empty cartridge at the bottom. An operator positions the wet DTF printed film on the application

The Vastex PTF-100 DTF Powder-to-Film system and D-100 Dryer Combo not only uniformly coats DTF films with adhesive powder but also cures it all in one! Completely eliminate dusting and spillage along with reducing waste while improving DTF printing performance and operator safety. 

To operate, a filled cartridge is inserted at the top of the unit, and an empty cartridge at the bottom. An operator positions the wet DTF printed film on the application tray, print side up. Once the polycarbonate door is closed tightly, the operator can adjust the angle of the powder deflector and the amount of powder to be released.

With each cycle, the user pulls a lever to release the desired amount of powder, then pushes it to start the timer/vibration. The top cartridge releases adhesive powder which rains down on the film, ensuring complete and even coverage. When empty, the upper cartridge can be switched quickly and cleanly with the lower cartridge containing all excess powder, reducing exposure while eliminating waste and allowing continuous production until refilling is needed.

Features:

• Fits up to 16" x 20" film sheets
• Adjustable timer
• Sealed for mess-free operation
• Interchangeable cartridges for quick and clean refills.
• D-100 conveyor dryer for consistent curing
• Exhaust hood to remove fumes while curing

*Lead times vary based on stock availability