Pay in installments of $55.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Water Pump for Audi 500 C2 Saloon, Volkswagen Caddy & Volkswagen Golf - 109656Vehicle Fitment & Part Details The Water Pump is listed for the Audi 500 C2 Saloon (1976 1984). Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU 109656 Component Water Pump Primary Fitment Audi 500 C2 Saloon (1976 1984) Vehicle Fitment Includes 42 supplied applications covering Audi and Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering. View Full
Vehicle Fitment & Part Details
The Water Pump is listed for the Audi 500 C2 Saloon (1976-1984). Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- 109656
- Component
- Water Pump
- Primary Fitment
- Audi 500 C2 Saloon (1976-1984)
Vehicle Fitment
Includes 42 supplied applications covering Audi and Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (42 applications)
| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Audi | 500 C2 Saloon | 431, 433, 434 | 1976-1984 | 1.6 YV | 63 kW / 85 HP |
| Audi | 500 C3 Saloon | 443, 444 | 1982-1991 | 1.8 DS; JW; NP; SH | 66 kW / 90 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.5 JB | 51 kW / 70 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.6 EW | 55 kW / 75 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.6 D CR; JK; ME | 40 kW / 55 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.8 JH | 70 kW / 95 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.6 EW | 55 kW / 75 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.6 D CR; JK | 40 kW / 54 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.8 GTI DX | 82 kW / 112 HP |
| Volkswagen | GOLF I Cabriolet | 155 | 1982-1993 | 1.8 DX; EV; KT; PB | 82 kW / 112 HP |
| Volkswagen | GOLF II | 19E, 1G1 | 1983-1992 | 1.6 ABN; EZ; HM | 55 kW / 75 HP |
| Volkswagen | GOLF II | 19E, 1G1 | 1983-1992 | 1.8 GU; GX; HV | 66 kW / 90 HP |
| Volkswagen | GOLF II | 19E, 1G1 | 1983-1992 | 1.8 GTI DX; EV; PB | 82 kW / 112 HP |
| Volkswagen | GOLF II | 19E, 1G1 | 1983-1992 | 1.8 GTI 16V KR | 102 kW / 139 HP |
| Volkswagen | GOLF III | 1H1 | 1991-2000 | 1.6 AEK; AFT; AKS | 74 kW / 101 HP |
| Volkswagen | GOLF III | 1H1 | 1991-2000 | 1.8 AAM | 55 kW / 75 HP |
| Volkswagen | GOLF III | 1H1 | 1991-2000 | 1.8 ABS; ACC; ADZ | 66 kW / 90 HP |
| Volkswagen | GOLF III | 1H1 | 1991-2000 | 2.0 2E; ABA; ADY; AGG; AKR | 85 kW / 115 HP |
| Volkswagen | GOLF III | 1H1 | 1991-2000 | 2.0 GTI 16V ABF | 110 kW / 150 HP |
| Volkswagen | GOLF III Cabriolet | 1E7 | 1993-1998 | 1.8 AAM; ANN | 55 kW / 75 HP |
| Volkswagen | GOLF III Cabriolet | 1E7 | 1993-1998 | 2.0 2E; ADY; AGG; AKR | 85 kW / 115 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.5 JB | 51 kW / 70 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.6 FR | 63 kW / 85 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.8 DX | 82 kW / 112 HP |
| Volkswagen | JETTA II | 19E, 1G2, 165 | 1984-1992 | 1.6 ABN; EZ; HM | 55 kW / 75 HP |
| Volkswagen | JETTA II | 19E, 1G2, 165 | 1984-1992 | 1.6 PN | 51 kW / 70 HP |
| Volkswagen | JETTA II | 19E, 1G2, 165 | 1984-1992 | 1.8 EV; PB | 82 kW / 112 HP |
| Volkswagen | JETTA II | 19E, 1G2, 165 | 1984-1992 | 1.8 GU; GX; HV | 66 kW / 90 HP |
| Volkswagen | JETTA II | 19E, 1G2, 165 | 1984-1992 | 1.8 16V KR | 102 kW / 140 HP |
| Volkswagen | JETTA III | 1H2 | 1991-2000 | 1.6 AEK; AFT; AKS | 74 kW / 101 HP |
| Volkswagen | JETTA III | 1H2 | 1991-2000 | 1.8 AAM | 55 kW / 75 HP |
| Volkswagen | JETTA III | 1H2 | 1991-2000 | 1.8 ABS; ADZ | 66 kW / 90 HP |
| Volkswagen | JETTA III | 1H2 | 1991-2000 | 2.0 2E; ABA; ADY; AGG; AKR | 85 kW / 115 HP |
| Volkswagen | KOMBI / MICROBUS / CARAVELLE T3 Bus | 25_ | 1979-2003 | 2.0 CU; CV | 51 kW / 70 HP |
| Volkswagen | PASSAT B1 | 32 | 1974-1981 | 1.6 YP | 63 kW / 85 HP |
| Volkswagen | PASSAT B1 Variant | 33 | 1976-1980 | 1.6 YN | 55 kW / 75 HP |
| Volkswagen | PASSAT B2 | 32B | 1980-1988 | 1.6 WV; WY; YN | 55 kW / 75 HP |
| Volkswagen | PASSAT B2 | 32B | 1980-1988 | 1.6 YP | 63 kW / 85 HP |
| Volkswagen | PASSAT B2 | 32B | 1980-1988 | 1.8 DS; JN; JV | 66 kW / 90 HP |
| Volkswagen | PASSAT B2 Estate | 33B | 1981-1988 | 1.6 D CR; JK | 40 kW / 54 HP |
| Volkswagen | PASSAT B2 Estate | 33B | 1981-1988 | 1.8 DS; JN; JV | 66 kW / 90 HP |
| Volkswagen | POLO I CLASSIC | 6V2 | 1996-2003 | 100 1.6 AEH; AFT; AFX; AKL; APF; AUR | 74 kW / 100 HP |
Fitment Notes
- Always match vehicle details before ordering. Verify VIN/engine.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and any listed engine or chassis information.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will the Water Pump fit my Audi 500 C2 Saloon?
This part (109656) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, original part details and any listed variant information before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 17 reviews
Sort
Product Reviews
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together.
Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there.
This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
recommand products
Engraved 3D Moon Lamp Valentine's Day Gift for Mom, to My Mom from Daughter Son, Personalized 5.9 Inch 3D Printing Moon Light Gifts for Mom Birthdays Mother's Day Gifts
47.82
Taidacent 5 Pcs Induction Wireless LEDs and Coil High-Power Wireless Induction Lamp Bead Wiring-Free LED Lamp for Micro Modeling decoration Gundam Model (1W, Blue)
14.95
I Love My Dad-Best Dad Birthday Gifts from Daughter Son-Dad Birthday Gifts Night Light-Room Decoration Dad's Gifts.
15.97
Personalized Gifts for Son Cool 3D Moon Lamp Large,Moon Led Light Gifts for Adult Son from Dad,Cute Desk Lamp for Bedroom Birthday Gifts for Men Son Kids
23.52
Mothers Day Sisters Gifts for Sister, Gifts for Sister from Brother Sister Birthday Gifts, Soul Sister Gifts for Women Sister in Law Gifts, Best Sister Ever Succulent Pots
43.18