SKU: 57547319723

Porsche 917K - 1970 Daytona Winner - Gulf Livery

Sale price$9897.75 Regular price$10997.50
Save 10%

Pay in installments of $2749.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 3 - Aug 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Porsche 917K - 1970 Daytona Winner - Gulf LiveryArguably one of the most iconic race cars in the history of motorsport, the Porsche 917s conception stemmed from an unexpected change to Commission Sportive Internationale, then the independent competition arm of the FIA, sanctioning rules. After the 1967 race season, it was announced that all future prototype engines would be limited to 3. 0 litres, in order to reduce the speeds generated at the fast endurance tracks, whilst also enticing

Arguably one of the most iconic race cars in the history of motorsport, the Porsche 917’s conception stemmed from an unexpected change to Commission Sportive Internationale, then the independent competition arm of the FIA, sanctioning rules. After the 1967 race season, it was announced that all future prototype engines would be limited to 3.0 litres, in order to reduce the speeds generated at the fast endurance tracks, whilst also enticing manufacturers who were already building three-litre Formula One engines into endurance racing. Well aware that few manufacturers were up to the challenge immediately, the CSI also announced a new Group 4 sports car series, which allowed engine displacements of up to 5.0 litres, but required at least 25 units be produced for homologation. Porsche, already hard at work polishing its 3.0-litre race car, the 908, stunned the world when it unveiled a second prototype race car aimed at the Group 4 category: the 917. Despite the FIA’s doubts, Porsche presented the FIA with 25 units just three weeks after the 917’s debut at the Geneva Motor Show in March of 1969.

Powering the early 917 was a 4.5-litre Flat-12 engine, designed by the noted Porsche engineer Hanz Mezger. To curtail development costs, the engine borrowed heavily from its 3.0-litre counterpart found in the Porsche 908. The 1969 race engines produced 580 bhp and 376 lb-ft of torque. Later models had the option to run larger-displacement engines of 4.9, 5.0 and eventually 5.4 litres, each providing a corresponding bump in performance. The Flat-12 would go on to become the 917’s most defining trait.

While the engine was an immediate success, the car’s body and aerodynamics were anything but. Early tests were worrisome. The car wandered heavily under braking and was diabolical in high-speed turns. None of the regular Porsche drivers wanted to race it. But the engineers at Porsche soldiered on, eventually adding wider rear wheels and a few other changes that made the 917 into a more controllable machine. Short and long-tail versions of the car were developed, but while the 917 long-tail is a thing of beauty, the shape made famous by a flurry of victories is the short version, better known as the 917K, for “Kurtz.”

The 917K did not have to wait long for success. On its public debut at the 1970 Daytona 24 Hours, John Wyer's Gulf-sponsored team finished 1-2 in the race, with the winning car breaking the distance record by 190 miles. This victory effectively began the 917K's domination of the World Sportscar Championship for the next two seasons. Porsche’s first overall victory at the 24 Hours of Le Mans soon followed, a momentous occasion for the German marque, but only one of many more to follow. Triumphs that year came quickly and resoundingly and, in total, the 917K’s first full year of competition would bring seven major victories. 1971 was no different, with six major victories topped by another overall win at Le Mans. Later that year, development of the Can-Am version would start, a car so dominant that the series lost popularity in the United States, never to return.

Today, the 917K is revered as one of the most iconic race cars of all time. It was the car that brought Porsche its first overall victory at the world’s most gruelling race, and the car that would go on to set one of the most impressive records of dominance in prototype racing series the world has ever seen. If its racing achievements alone were not enough, the car would go on to be immortalized on the big screen by Steve McQueen in the film ‘Le Mans'.

This fine 1:8 scale model of the Porsche 917K is based on the #2 car driven to victory by Pedro Rodríguez and Leo Kinnunen, with a single stint provided by Brian Redman, at the 24 Hours of Daytona in 1970. On the awesome 31-degree high bankings of the Daytona Speedway, ex-Aston Martin race team manager John Wyer's Gulf-sponsored team finished 1-2 in the race, with Jo Siffert and Redman (in his actual car) taking the second podium place. The #2 lead car annihilated its rivals, breaking the distance record by 190 miles, 48 laps ahead of the #28 works Ferrari in third. It was the first race in which the iconic Porsche 917K appeared, and this victory was effectively the start of 917K's domination of the WSC for the next two seasons.

This model has been handcrafted and finished in our workshops with the co-operation and assistance of Porsche regarding original finishes, materials, archive imagery and drawings. The use of supremely accurate digital scanning of the original car has allowed us to perfectly recreate every detail at scale. Furthermore, it has undergone detailed scrutiny by both engineering and design teams to ensure complete accuracy of representation.

The Porsche 917K Daytona 1970 is limited to just 199 pieces.

--------------------------------------------------------------

Elevate your 1:8 scale collection with one of our elegant, harmonious and handcrafted display cabinets, stands or plinths.

View Display Cabinets for this model >

This model is just one of several 1:8 and 1:8 scales in the Porsche 917 Collection.

Discover the Porsche 917 Collection >

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 57547319723

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jon
Louisville, US
★★★★★ 3
Good chair with some quality issues
Color: Black, Size: Pack of 1
I've been using this chair for 12+ hours a day for the last 5 or 6 months and so far it is much better than my last chair I bought at Staples with a few problems. First, overall the chair is still comfortable when set properly, the cushion on the bottom is a little worn out but is still comfortable and I find the backrest comfortable except for the lumbar support which has very little cushioning and feels like a plastic brick being pushed into my back, however I find that I can keep it mostly out of the way most of the time and it isn't noticeable when I carry most of my weight on my upper back area while reclining. The reclining angle is super comfortable and the mesh on the back is not noticeably worn out. I like the headrest which is made of a cushioned mesh, its not better than a pillow but it's very comfortable to be able to rest your head in a chair you are going to sit in for long hours and gives good support. The arm rests don't feel amazing, they have a very stiff plasticky cushion feeling that I'm not much a fan of in terms of pure comfort but they get the job done as I mostly only rest my elbows on them when typing. The arm rest adjustment has a pretty good height range and I keep them at the highest settings and set as close to the chair as possible. While the chair may be comfortable, I have had some quality issues that bring down my opinion of the chair. First, my right arm rest does not go as high as my left arm rest and I have to set the left one down two positions to match the right one Second, the back rest locking for the upright position is broken but I can rarely get it to work as long as I don't put much weight on the back. I would imagine that most people would want to lock the chair upright as opposed to the other positions. Third, the 3 screws holding in the backrest untighten themselves over time, causing the backrest to move to its furthest back position and rock left or right if I lean on either side. When I tighten them again they will usually last about 1-2 weeks before becoming mostly loose again. There is no danger of the screws completely falling out though, just losing their tightness Lastly, I'm not sure how stable or secure the wood panel at the bottom of the seat that everything attaches to is strong enough, I used to have my armrests adjusted out further from the center but when I would lift up on my arms to adjust my seating position I would occasionally hear a sound of the wood stressing under the torque from the armrests. since I moved both armrests as close to the center as I can this has not happened; I would like them a little bit wider but I don't want to risk breaking the chair over it. Also, one of the factory-installed screws in the bottom seat panel fell out and wont stay back in but I haven't noticed any problems other than the risk of stepping on a screw caused by it While this is likely the most comfortable chair I've ever sat in, I have to give it 3 stars for the uncomfortable lumbar support and the quality control issues. If the QC issues were fixed I could easily give this chair a 4 star review
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2022
W
Verified Purchase
Wes B.
San Leandro, US
★★★★★ 5
Fantastic!
Color: Light Grey, Size: Pack of 1, Color: Light Grey, Size: Pack of 1
Outstanding quality and incredibly easy to assemble! The back support is a perfect 10/10. I was debating between the M57 and the B100, and the B100 definitely won me over. The materials feel premium and durable. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
D
Verified Purchase
Dre
Louisville, US
★★★★★ 5
Comfortable. Great Value for money. Easy to assemble. Great customer service.
Color: Black, Size: Pack of 1, Color: Black, Size: Pack of 1
I've been looking for a new chair to replace a cheap $30 chair i bought off of Amazon last year that had been killing my back and shoulders. I wanted something in the $150-$200 range and settled on the M18. Shipping was a fast 3 days with Prime and the box arrived in great condition. All parts were separately wrapped or in their own boxes. Came with all hardware and nothing was missing. Assembly took me a little longer then normal because i have rotator cuff injury in my left shoulder so that arm is mostly useless. The most difficult part for me was attaching the wheels to the base. Other then that it was simple. Once the chair was assembled i sat in it for the first time and started making my adjustments with the recline feature, armrest level along with the headrest. Next i reached around for the lumbar support knob and tried to adjust it but with my bad shoulder i decided to just get out of the seat and turn it around and adjust it with both hands. After spinning the chair a round to get at the lumbar knob i noticed a large crack in the plastic in the middle of the back of the lumbar plastic piece. I had not made any lumbar adjustments yet so i assumed this is how i received it. The lumbar support comes preinstalled to the backrest so it either was damaged before or during the shipping process. Either way it was damaged before being delivered to me. The lumbar support still functioned properly but it was still broken. I decided to contact Sihoo's customer support that came along with the installation instructions regarding the damaged lumbar piece. I received a reply the next day and after sending them some more info about my order and a couple pics they shipped me a replacement part which took a week to arrive. I swapped out the damaged part and after owning the chair for a week so far i am really happy with my purchase. Im about 5'10 180lbs. At its highest height level my feet reach the ground comfortably flat footed. The backrest fully covers my back and the headrest adjusts very well to sit on the back of my lower head/upper neck. The armrests only go up and down....not forward and back or tilt inwards. This is fine for me as they are grooved to fit your forearm while sitting at your desk/keyboard. The armrests are also a soft cushioned rubber material...not a hard plastic. The mesh of the backrest and headrest are good material and seem well made. The seat is very wide and the cushioning is firm which i prefer. Usually more firm cushioning seems to last longer and hold its form. The base of the chair is VERY sturdy and made of all metal. My chair is on carpet and holds its position very well. As far as recline goes you can set it to recline all the way back, half way or lock the chair in the upright position. You can also adjust the resistance on the reclining feature. So that being said im very happy with my purchase. It arrived with a slight flaw which the company corrected in a fast manor and was very polite in their customer support. I personally don't have a lot of experience with many office chairs and have never used a high end chair($500-$1000+) chair before to make any comparisons. All my chairs for the most part have been from local stores like Staples or Office Depot. Id recommend this over anything they carry in this price range....and i went and looked at their products before buying this chair as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 1, 2023
H
Verified Purchase
Hamza Yahya
Massapequa, US
★★★★★ 5
SIHOO M18 chair is amazing
Color: Black, Size: Pack of 1
I purchased the SIHOO M18 Ergonomic Chair a few years ago and have really enjoyed it. It’s very comfortable and offers multiple adjustments, whether you want to recline and relax or sit upright for work. The back support is also excellent, and I haven’t had any issues with the chair at all. You can easily tell it’s high quality from the build and appearance—no creaks or noises whatsoever. I highly recommend this chair to anyone in the market for a new office chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 12, 2026
M
Verified Purchase
Megan R Wesby
Battle Creek, US
★★★★★ 4
Good budget-friendly option
Color: Black, Size: Pack of 1, Color: Black, Size: Pack of 1
The chair arrived 4 days early and was easy to put together by following the instructions carefully. It feels sturdy and comfortable. It does support the lumbar region of the back and the arm rests are adjustable vertically as well as the head rest. I wish the arm rests were able to rotate in and out for added customization and that the back of the chair could be adjusted up and down for more precise support. But for a budget chair, it does a good job.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026

recommand products