Hutton Square Trellis Panels 35mm x 18mm Battens

Hutton Square Trellis Panels 35mm x 18mm BattensHutton Square Trellis Panels are pressure treated softwood garden panels with smooth planed 35mm x 18mm battens and 100mm square spacing. Hand crafted for use as fence toppers or standalone garden screens, they carry a 15 year warranty against rot and insect attack. Specifications Property Detail Material Softwood Treatment TANALITH E (Next Generation) pressure treatment Finish Smooth planed Batten size 35mm x 18mm Grid spacing 100mm square apertures

Hutton Square Trellis Panels are pressure-treated softwood garden panels with smooth planed 35mm x 18mm battens and 100mm square spacing. Hand-crafted for use as fence toppers or standalone garden screens, they carry a 15-year warranty against rot and insect attack.

Specifications

What it's used for

• Fixed to the top of existing close-board or feather-edge fencing to add height and airflow without solid mass
• Used as standalone garden screens to divide planting areas or patio spaces
• Trained as climbing frames for roses, clematis, sweet peas, and other garden climbers
• Mounted to masonry or timber posts as decorative boundary infill panels

Fitting and handling

Stack panels flat on a level surface in a dry, ventilated area for at least 48 hours before fixing to allow any residual moisture from the treatment process to stabilise. Fix to timber posts or existing fence frameworks using galvanised or stainless-steel screws or panel clips to prevent corrosion reacting with the TANALITH E preservative. Where panels are cut to fit, treat all sawn ends with an approved end-grain preservative to maintain the integrity of the rot protection.

FAQ

What is the gap size in the Hutton Square Trellis Panels?

The square apertures are 100mm x 100mm, formed by the 35mm x 18mm planed softwood battens. This spacing is wide enough for most climbing plants to thread through easily and gives the panels a traditional, open appearance.

Can these trellis panels be used as standalone fence panels, or do they need to be fixed on top of existing fencing?

They work in both applications. For standalone use, mount them between fence posts set at the correct centres for the panel width. For fence-top use, they are typically fixed above a solid panel to add extra height while keeping wind loading lower than a full solid extension would.

Are Hutton Square Trellis Panels suitable for painting or staining?

Yes. Once the treatment has fully cured, usually after a few weeks outdoors, you can apply any exterior wood stain or paint. Avoid sealing the timber too soon after delivery as the TANALITH E treatment needs time to dry out from the surface first.

Nottage Timber Merchants supply Hutton trellis panels to trade and retail customers across South Wales, with next-day delivery available to the Bridgend area. If you are also planning a new fence run, browse our feather-edge boards for compatible close-board fencing materials.