ToolkitRC M4Q 4x50W AC/DC Charger

ToolkitRC M4Q 4x50W AC/DC ChargerThe ToolKitRC M4Q is a 4in1 charger that has 4x 50W charging circuits inside. This allow you to balance charge 4 batteries at the same time. This charger also features an integrated power supply so you can just plug it into your nearest wall socket. It also includes a XT60 input connector to enable in the field charging. We have found that out of the box (or after a firmware update) you will likely need to calibrate the voltage on the charger before

The ToolKitRC M4Q is a 4in1 charger that has 4x 50W charging circuits inside. This allow you to balance charge 4 batteries at the same time. This charger also features an integrated power supply so you can just plug it into your nearest wall socket. It also includes a XT60 input connector to enable in the field charging.

We have found that out of the box (or after a firmware update) you will likely need to calibrate the voltage on the charger before use, it takes 3 minutes but you will need a voltmeter. We have a quick guide showing how to do that here - Toolkit RC voltage calibration guide.

Specifications

• Input voltage:[email protected], DC10-18V@MAX20A
• Type of battery:LiPo LiHV LiFe Lion@1-4S NiMh @1-10S Pb @1-8S
• Balance current:240mA @2-4S
• Balance accuracy: < 0.005V
• Charge power:
  • 0.1-5A@50W*4 DC
  • 0.1-5A@50W*2 AC
  • 0.1-5A@25W*4 AC
• Voltage range:0.2V-5.0V @1-4S
• Internal resistance:1-100mR @1-4S
• MicroUSB:[email protected]
• Product size:150*112*36.5mm
• Product wight:450g
• Pack size:160*160*46mm
• Pack wight:600g
• LCD:IPS 3.5inch 480*320pixel

TookitRC M4Q Manual V1.0

Includes

• 1 x ToolkitRC M4Q Charger