2012-2012 Ram 1500 6" Lift Kit with NX2 Nitro Shocks (BDS1753H)

2012-2012 Ram 1500 6" Lift Kit with NX2 Nitro Shocks (BDS1753H)BDS steps up the performance and capability of the 2012 Ram 1500 4WD with a 6" suspension lift that clears up to 37" tires. Up front it runs top mounted strut spacers, high arched 1 4" steel crossmembers, multi piece differential relocation brackets, and heavy duty skid plates, with CNC machined ductile iron steering knuckles and replacement tie rod ends to correct steering geometry and keep ESC compatibility. The rear uses progressive rate Pro Ride

BDS steps up the performance and capability of the 2012 Ram 1500 4WD with a 6" suspension lift that clears up to 37" tires. Up front it runs top-mounted strut spacers, high-arched 1/4" steel crossmembers, multi-piece differential relocation brackets, and heavy-duty skid plates, with CNC-machined ductile iron steering knuckles and replacement tie rod ends to correct steering geometry and keep ESC compatibility. The rear uses progressive-rate Pro-Ride coil springs, upper control arm and track bar relocation brackets, bump stop extensions, and sway bar links, topped with your choice of NX2 nitrogen gas shocks or FOX 2.0 IFP performance shocks.

Features

• High clearance crossmember design maximizes ground clearance
• Robust steering knuckles maintain ESC system compliance
• HD skid plate system for improved offroad protection
• Multipoint differential relocation brackets to secure the front axle and improve CV angles
• Choice of BDS NX2 gas or FOX 2.0 IFP performance series gas shocks
• Factory Protection Plus drivetrain warranty included
• Kit is FMVSS No. 126 compliant
• NX2 shocks: nitrogen-charged, twin-tube design with 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8" high-flow piston
• Self-lubricating seals, silver powder coat finish

Specs

• Front Lift Method: Cross-Member
• Rear Lift Method: Coil Springs
• Shocks Included: Yes
• Front Lift Height: 6 inch
• Rear Lift Height: 3 inch

Recommended Tire & Wheel Fitment

• Tire Size: 37x13.5
• Wheel Diameter: 18x9, 20x9
• Back Spacing: 5/5

Notes

• These trucks vary from 1" to 3" tail high from the factory. Measure before ordering. The 022209, 022309, and 022509 coil springs can be substituted to achieve the desired stance. Use the 3" springs if 3" tail high, the 5" springs if level to 1" tail high.
• Not recommended for AWD models.
• Will not fit adjustable air suspension equipped models.
• This kit does not fit 2013 models.
• Stock 17" and 18" wheels cannot be re-installed. Stock 20" can be reinstalled with a factory tire.
• TRX models gain approximately 1" of additional lift; this kit is not recommended on TRX due to possible CV shaft vibration. Consider the 4" system for 5" of lift, or replace the TRX struts with standard struts.
• The rack and pinion steering is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. Larger tire diameter or reduced wheel backspacing increases sensitivity and can cause minor steering wheel shimmy.

Includes

• BDS022509, 09-10 Dodge 1500 5in Rear Box Kit (UPC 658848615414)
• BDS022620, 06-10 Dodge 1500 6 Inch Front Box Kt (1of4) (UPC 658848615452)
• BDS022621, 06-10 Dodge 1500 6 Inch Front Box Kt (2of4) (UPC 658848615469)
• BDS022624, 2012 Dodge 1500 6 Inch Frnt Box Kit 3 of 4 (UPC 658848615483)
• BDS022625, 2012 Dodge 1500 6 in Frnt Box Kit 4 of 4 (UPC 658848615490)
• BDS85759, Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1 (UPC 711745609686)