Heavy Duty Drive Belt for Yamaha Grizzly 600 - Gates / Napa G-Force 30G3596

Heavy Duty Drive Belt for Yamaha Grizzly 600 - Gates / Napa G-Force 30G3596Gates CVT Drive Belt for Yamaha This CVT drive belt fits Yamaha UTVs and Side by Sides. Belt description: CVT ( Continuous Variable Transmission ) Napa G Force 30G3596 Standard Version of 30C3596 Yamaha UTVs and Side by Sides Replaces Carlisle UA423 Replaces Dayco XTX2270 Replaces Goodyear 33GBS938 Replaces Napa Gates 30G3596, 30C3596 Replaces Prime Line 724012 Replaces Yamaha 4WV176410000, 4WV176410100 Length: 943mm (37. 125 in) Width: 33mm (1. 313

Gates CVT Drive Belt for Yamaha

This CVT drive belt fits Yamaha UTVs and Side-by-Sides. 

Belt description:

• CVT (-Continuous Variable Transmission-)
• Napa G-Force - 30G3596 -  Standard Version of 30C3596
• Yamaha UTVs and Side by Sides
• Replaces Carlisle UA423
• Replaces Dayco XTX2270
• Replaces Goodyear 33GBS938
• Replaces Napa / Gates 30G3596, 30C3596
• Replaces Prime Line 724012
• Replaces Yamaha 4WV176410000, 4WV176410100
• Length: 943mm (37.125 in)
  
• Width: 33mm (1.313 in)
  
• High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance

Fits the following Yamaha models:

• 1998 - 1999   Grizzly  595cc
• 2000 - 2001   Grizzly 600  595cc

The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.

Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.