25+5 uF MFD ±5% 370/440 VAC CBB65 50/60 Hz Dual Run Start Round Air Conditioner Capacitor - Fits AC Unit Fan Motor, Heat Pump

25+5 uF MFD ±5% 370/440 VAC CBB65 50/60 Hz Dual Run Start Round Air Conditioner Capacitor - Fits AC Unit Fan Motor, Heat Pump25+5 uF 370 440 VAC Volts 5% Round Run Capacitor Key Features Capacitance: 25 5 Microfarad (uF MFD) Voltage Rating: Dual 370 or 440 Volts AC Tolerance: 5% Frequency: 50 60 Hz Shape: Round Terminals: 3 (C, FAN, HERM) Operating Temperature: 40 C to +70 C Type: CBB65 Dual Run Capacitor Replaces Cross Reference Part Numbers Goodman: CAP050250440RSP USA2225 Also replaces any 25+5, 25 5, or 25 5 MFD round capacitor with a 370V or 440V rating. Compatibility

25+5 uF 370-440 VAC Volts ±5% Round Run Capacitor

Key Features

• Capacitance: 25/5 Microfarad (uF/MFD)
• Voltage Rating: Dual 370 or 440 Volts AC
• Tolerance: ±5%
• Frequency: 50/60 Hz
• Shape: Round
• Terminals: 3 (C, FAN, HERM)
• Operating Temperature: -40 °C to +70 °C
• Type: CBB65 Dual Run Capacitor

Replaces / Cross-Reference Part Numbers

• Goodman: CAP050250440RSP
• USA2225
• Also replaces any 25+5, 25/5, or 25-5 MFD round capacitor with a 370V or 440V rating.

Compatibility & Fitment

• Designed for HVAC systems, including air conditioners and heat pumps.
• Simultaneously runs a compressor motor (25 uF) and a fan motor (5 uF).
• Physical dimensions must match the existing capacitor for proper mounting. Verify diameter and height before ordering.

When to Replace

• Outdoor unit hums but the fan or compressor does not start.
• Fan runs but the compressor does not engage.
• Capacitor case is visibly swollen, bulging, or leaking fluid.
• Capacitance reading is outside the ±5% tolerance when tested with a multimeter.

Installation Tips

• Disconnect all electrical power to the HVAC unit before starting work.
• Safely discharge the existing capacitor by shorting the terminals with an insulated-handle screwdriver.
• Note or photograph the wire placement on the old capacitor's C, FAN, and HERM terminals.
• Connect the wires to the corresponding terminals on the new capacitor.
• Secure the new capacitor with the original mounting bracket.